How to Swap USDT (TRC20) to USDT on TON on Android: 5-Step Method, Address and Memo (2026)

By · Published 2026-11-07 · Last verified 2026-11-07

How do you swap USDT (TRC20) to USDT on TON on an Android phone?

In Swappr, pick Tether (TRC20) as the coin you send and Tether (TON) as the coin you get, enter an amount inside the limits shown, paste your own TON wallet address (it usually starts with UQ), then send the exact USDT once from your TRON wallet. FixedFloat, which processes Swappr swaps, lists both Tether (TRC20) and Tether (TON), and its confirmations table shows 1 confirmation for each (checked 2026-11-07). You need a little TRX to send on TRON, and a little Gram (GRAM, formerly Toncoin) later to move the USDT on TON. This page covers the 5 steps, the address and memo rules, the costs and the checks after the swap. Swappr is a free Android app for simple multi-coin crypto swaps, made by GSPTeck.

Grid of the five steps to swap USDT on TRC20 to USDT on TON in Swappr: pick the Tether TRC20 to Tether TON pair, choose amount and rate, paste a UQ address from your own TON wallet, send the exact USDT once on TRON and track the order, with a reminder to keep TRX
The 5-step method.

The 5-step USDT (TRC20) to USDT (TON) swap method

Five steps, in this order, with the two network checks built in. If the pair does not appear in the app's coin list, the app cannot do it today; the list in the app is the current one.

  1. Pick the pair. Send: Tether (TRC20). Receive: Tether (TON). Check the minimum and maximum shown for the pair.
  2. Enter the amount and choose a rate. Fixed locks the quote for 10 minutes; float follows the market until the swap runs.
  3. Paste your TON address. Copy it from the receive screen of a TON wallet you control. A user-friendly TON address is 48 characters.
  4. Send the exact USDT once. Tap Swap now, then send the amount shown from your TRON wallet to the deposit address, on TRC20, with TRX in the wallet for the fee.
  5. Wait and track. Keep the order ID and the TRON transaction ID until the USDT shows in your TON wallet.

Why is USDT on TRON different from USDT on TON?

They are the same Tether token issued on two different blockchains, so you cannot just send one to the other's address. Tether lists them separately: a TRC20 token on Tron (contract TR7NHqjeKQxGTCi8q8ZY4pL8otSzgjLj6t) and a Jetton on TON (master address EQCxE6mUtQJKFnGfaROTKOt1lZbDiiX1kCixRv7Nw2Id_sDs). Tether says one token on one chain equals one token on another, but moving between chains needs a swap or bridge. TON's docs explain that Jettons (the TEP-74 standard) are TON's counterpart to ERC-20 tokens, and that each holder gets their own Jetton wallet contract. Your wallet app handles that; you paste your normal wallet address, not a Jetton wallet address.

USDT (TRC20)USDT (TON)
ChainTRONThe Open Network (TON)
Token standardTRC20Jetton (TEP-74)
Address looks likeStarts with T48 characters, usually starting UQ or EQ
Fee coinTRXGRAM (formerly Toncoin)
FixedFloat confirmations11

The USDT network comparison covers the TRON, BNB Smart Chain and Ethereum versions.

Two columns comparing USDT on TRON, a TRC20 token with T addresses and TRX fees, with USDT on TON, a Jetton with 48-character addresses and GRAM fees, each needing 1 FixedFloat confirmation
Same Tether, two chains.

Which TON address do you paste: UQ or EQ?

Paste the address your wallet shows on its receive screen, which for a normal wallet is the non-bounceable form starting with UQ. TON's address docs say a user-friendly address is a 48-character base64 string with flags and a checksum: E... is bounceable and U... is non-bounceable on mainnet, while k... and 0... are testnet-only. Both forms point to the same account. The docs recommend non-bounceable addresses for wallets, so funds can be credited even if the wallet has never been used.

If the app rejects it, the invalid address error guide lists the six usual causes.

Grid of TON address forms: UQ non-bounceable for wallets to paste, EQ bounceable for contracts, k and 0 testnet-only, the raw 0 colon format without a checksum, a TRON address in the wrong field, and receiving to your own wallet before an exchange memo
Which TON address to paste.

Do you need a memo to receive USDT on TON?

Not for your own wallet: an address that belongs only to you needs no memo or comment. Exchanges often use one shared TON deposit address for many users and need a comment to match your deposit. Swappr's form asks for a receiving address, so receive to your own TON wallet first and move the USDT to an exchange afterwards with its comment. The memo and destination tag guide explains the same rule for XRP, XLM, TON and Cosmos.

What does a USDT TRC20 to USDT TON swap cost?

You pay the TRON network fee to send, then FixedFloat's fee plus the payout network fee, all shown before you confirm. FixedFloat's FAQ (checked 2026-11-07) lists 1% plus network fee for a fixed rate, with the rate held for 10 minutes, and 0.5% plus network fee for a float rate. We don't quote a total because it depends on the amount and the networks at the time; compare the final amount on the confirm screen.

CostWho sets itPaid in
TRON send feeThe TRON network (your wallet shows it)TRX, or staked energy and bandwidth
Fixed rate feeFixedFloat: 1% plus network feeIncluded in the quote
Float rate feeFixedFloat: 0.5% plus network feeIncluded in the quote
Moving USDT on TON laterThe TON networkGRAM (formerly Toncoin)

Without TRX the USDT transfer can't go out at all; why you need TRX to send USDT on TRON explains bandwidth and energy. For which rate to pick, see fixed vs float rate.

Four costs of the swap: the TRON send fee in TRX or staked energy, a 1 percent fixed rate fee plus network fee, a 0.5 percent float rate fee plus network fee, and GRAM needed later to move USDT on TON
What the swap costs.

What should you check after the swap?

Check three things: the USDT arrived, it is the real Tether Jetton, and you have GRAM to move it. Your wallet should show USDT on TON once the payout lands. In a TON explorer, the Jetton's master address should match Tether's (EQCxE6mU...w2Id_sDs). Fake tokens with real-looking names do appear in TON wallets: Blockchain.com's support page on the rename of Toncoin to GRAM (effective 15 June 2026, 1:1, no action needed) warns about a fake "GRAM" Jetton, and the same trick works with any token name. Anyone asking you to "claim" or "convert" TON to GRAM is running a scam. Then add a little GRAM to the TON wallet, because the network charges its fees in GRAM.

Vertical Pinterest graphic with five points on swapping USDT TRC20 to USDT on TON on Android
Pinterest pin: swap USDT TRC20 to USDT on TON.

FAQ

Can I send USDT TRC20 directly to a TON address?

No. TRC20 USDT lives on TRON and USDT on TON is a Jetton on another chain, so a TRON wallet cannot send to a TON address. You need a cross-chain swap, such as Tether (TRC20) to Tether (TON) in Swappr.

How long does a USDT TRC20 to TON swap take?

FixedFloat's table lists 1 confirmation for Tether (TRC20) and 1 for Tether (TON) before it acts. The total also depends on when your deposit is seen and on network load, so keep the order page open until it completes.

Is Toncoin the same as GRAM?

Yes. The native coin of TON was renamed from Toncoin (TON) to Gram (GRAM) on 15 June 2026. Balances converted 1:1 automatically and addresses did not change; the blockchain is still called TON.

Do I need GRAM to receive USDT on TON?

Not to receive it from the swap. You need some GRAM in the wallet later to send or move the USDT, because TON network fees are paid in GRAM.

Sources

Get the app: Swappr on Google Play · Swappr home