Crypto Swap Checklist: 10 Checks Before You Send Your Deposit (2026)
What should you check before you send a crypto swap deposit?
Ten things, in this order: the coin, the network, the receiving address, any memo or tag, the amount, the rate type, the refund address, the sending wallet, the network fee setting and a saved record of the order. A crypto deposit can't be reversed once it confirms, so the checks come before you tap send, not after. This checklist is built for Swappr, a free Android app for simple multi-coin crypto swaps that processes swaps through FixedFloat, and it applies to any swap service. The rules quoted come from FixedFloat's FAQ, checked on 2026-11-16. It is educational, not financial advice.
The 10 checks at a glance
Print or screenshot this table and tick each row before every deposit; each row links to a longer guide below.
| # | Check | What to confirm | If it fails |
|---|---|---|---|
| 1 | Coin | The coin you send matches the order | Stop; start a new order |
| 2 | Network | Your wallet sends on the order's network | Don't send |
| 3 | Receiving address | It belongs to the network of the coin you receive | Fix before creating the order |
| 4 | Memo or tag | Added if the coin needs one | Re-create the order |
| 5 | Amount | Inside the shown limits, with fee coin kept back | Adjust the amount |
| 6 | Rate type | Fixed or float chosen on purpose | Re-read the terms |
| 7 | Refund address | On the sending coin's network | Correct it first |
| 8 | Sending wallet | A wallet you control, not an exchange account | Withdraw to your wallet first |
| 9 | Fee setting | Normal, not the slowest | Raise the fee |
| 10 | Record | Order ID and transaction hash saved | Save them now |
1 and 2. Do the coin and the network match the order?
They must match exactly, because the same ticker can exist on several networks. USDT, for example, runs on TRON (TRC20), Ethereum (ERC20) and BNB Smart Chain (BEP20), and a deposit sent on the wrong one will not arrive as the order expects. Our guide to choosing between USDT TRC20, BEP20 and ERC20 explains how to tell them apart.
Look at your wallet's send screen, not just the coin name. If it says "Arbitrum" or "Base" but the order says "Ethereum", they are different networks.
3. Is the receiving address valid for the coin you will receive?
It has to be, and FixedFloat's FAQ says the usual cause of an "invalid address" message is a network mismatch: the address's network doesn't match the network of the currency selected in the Receive field. Paste the address, then compare the first and last four characters with your wallet's receive screen, because clipboard malware can swap a copied address for a lookalike.
Read the invalid address error guide and the copy and paste address checks for the full routine. For a hardware wallet, verify the address on the device screen.
4. Does this coin need a memo or destination tag?
Some coins do, mainly XRP, XLM, TON and Cosmos-based coins, so that the receiving service can credit the right account. A missing tag can leave funds sitting unassigned on the receiving side. Our destination tag and memo guide lists which coins and how to enter them.
5. Is the amount inside the limits, with fee coin left over?
Stay inside the minimum and maximum the app shows, and keep a margin of the coin that pays network fees. If you send your whole balance, your wallet may not be able to pay for the transaction itself; on TRON the fee coin is TRX, as our TRX for USDT transfers explainer shows.
FixedFloat's FAQ also says a network fee is a payment to miners, individual to each blockchain, so it is not part of the service fee.
6. Fixed or float: which did you pick, and why?
Choose fixed if you need to know the amount in advance, and float if a lower service fee matters more. FixedFloat's FAQ states the terms:
| Fixed rate | Float rate | |
|---|---|---|
| FixedFloat fee | 1% + network fee | 0.5% + network fee |
| Rate set | When the order is created; frozen for 10 minutes | After your deposit has its confirmations |
| Amount | Must exactly match the order | Final amount may rise or fall |
| If the market moves | Over 1.2% before your transaction appears: refund or continue at market rate | You receive more or less |
Our fixed versus float rate guide compares them in more detail.
7. Is the refund address on the sending network?
It should be, because a refund goes back as the coin you sent. FixedFloat's FAQ says that if your order expires before the transaction arrives, you can continue at a floating rate or refund the amount minus the network fee, and for the refund you give an address. Use an address you control, on the sending coin's network, and read refund address versus receiving address if the two are confusing.
8. Are you sending from a wallet you control?
Preferably yes. An exchange withdrawal can arrive net of the exchange's own fee, and FixedFloat's FAQ says a fixed-rate deposit must match the order amount exactly, so a withdrawal from an exchange account is easy to get wrong. Our guide to sending a swap deposit from an exchange account lists the risks. Our sister site CoinX also recommends a small test transaction before a transfer when you're sending to a new address.
9. Is the network fee setting normal?
Use your wallet's default, not the cheapest option. FixedFloat's FAQ warns that a low network fee can leave the transaction with poor priority, so the order may wait a long time for its required confirmations. If you've already sent on Bitcoin or Ethereum and it's stuck, the FAQ points to the RBF feature to raise priority; see our guides on an unconfirmed Bitcoin deposit and a pending Ethereum deposit.
10. Did you save the order ID and transaction hash?
Save both before you leave the screen. FixedFloat says order status updates in real time, shows explorer links once transactions enter the network, and can send email notifications if you add an address. Our guide to tracking a swap with a TXID and block explorer shows how to read them. CoinX's explainer on whether a crypto transaction can be reversed explains why this record matters. The same order ID and both transaction IDs are items on CoinX's year-end crypto records checklist.
What if something goes wrong?
Don't send a second deposit. Check the order page first, then match your situation:
- Sent late or the wrong amount on a fixed order: expired order and wrong amount: what to do.
- Received less than quoted: six reasons you received less.
- Order paused: FixedFloat checks and paused swaps.
To run these checks in an app built around them, get Swappr on Google Play, or start from the Swappr homepage. Swappr is our own app, it is Android-only, and pairs depend on what FixedFloat supports at the time.
FAQ
Do I need to create an account to swap?
FixedFloat's FAQ says the service needs no registration and no unnecessary details. An order can still be paused for checks in some cases; see our guide on swapping without an account.
How long should a swap take?
It depends on how fast your deposit confirms, which depends on the network and your fee. Our swap times by network guide breaks it down.
Can I cancel a swap after sending?
A confirmed deposit can't be undone. Before you send, nothing moves, so you can close the order and start again. If the order expires, FixedFloat lets you continue at a floating rate or refund minus the network fee.
Is this checklist only for Swappr?
No. The checks apply to any swap service, though the fixed and float terms quoted are FixedFloat's, which Swappr uses.
Sources
- FixedFloat FAQ: fixed and float rates, fees, expired orders, invalid addresses, low network fees (checked 2026-11-16)
- Bitcoin.org: Some things you need to know (confirmations and irreversibility; checked 2026-11-16)
- Swappr homepage (checked 2026-11-16)