Crypto Swap Cost Comparison Checklist: What to Compare Before You Swap (2026)
What should you compare before you swap crypto?
Compare the same amount, the same pair, the same networks and the same rate type, then look at four cost layers: the network fee you pay from your wallet to send the deposit, the provider or service fee the exchange documents, the amount you are quoted to receive, and any later fee to move the coins onward. FixedFloat, which processes swaps started in Swappr, documents a 1 percent fee plus a network fee on a fixed-rate order and a 0.5 percent fee plus a network fee on a floating-rate order, checked on its FAQ on 2026-11-08. Those figures are the published fee schedule, not a live quote for a pair. This page is a comparison checklist, not a rate board, and it is educational only.
Swappr is a free Android app for simple multi-coin crypto swaps. You pick the coin you have and the coin you want, choose a fixed or floating rate, paste an address you control, and send the deposit from your own wallet. The app does not hold a balance for you. See the Swappr homepage or the Swappr listing on Google Play for the current flow. What Swappr itself charges is covered in is Swappr free? swap fees and network fees explained.
The 7-point crypto swap cost comparison checklist
A cheaper-looking percentage is not a comparison if the pair, the network or the rate type changed. Run these seven checks on one side-by-side note before you send. The checklist is ours; the fee figures below are quoted from FixedFloat's FAQ, checked on 2026-11-08.
- Match the pair and both networks. USDT on TRON is not USDT on Ethereum or TON. A comparison that silently changes the destination network is not a comparison.
- Match the input amount. Some quotes change shape near a minimum or maximum. Use the same send amount on both sides.
- Match the rate type. Compare a fixed quote with a fixed quote, and a floating quote with a floating quote. The fixed-rate versus float-rate guide explains what each promise actually covers.
- Read the documented provider fee. FixedFloat's FAQ states a fixed-rate fee of 1 percent plus a network fee, and a floating-rate fee of 0.5 percent plus a network fee.
- Add the send fee you pay from your wallet. That network fee is separate from the service fee and is paid to the chain, not as a line you can skip.
- Compare the receive amount, not only the percentage. The useful number is how many units arrive at your destination address for the same send.
- Budget the onward move. If you will later send the received coins somewhere else, you need the destination chain's fee coin as well.
What does FixedFloat document about fees?
On 2026-11-08, the FixedFloat FAQ at ff.io/faq said you can choose two exchange strategies: a fixed rate with a FixedFloat fee of 1 percent plus a network fee, and a float rate with a FixedFloat fee of 0.5 percent plus a network fee. It also said the network fee is a payment to miners for processing a transaction and that the amount is individual for each blockchain. This post does not quote a live pair rate, a live miner fee or a live receive amount, because those change.
The same FAQ says a fixed rate is fixed when you create the order and freezes for 10 minutes. If the market rate changes by more than 1.2 percent before your deposit appears on the blockchain network, the order may be treated differently; read the live FAQ for the current wording before you rely on a freeze. A floating rate is finally set within 10 minutes after your deposit receives the required number of confirmations, so the receive amount can move up or down with the market.
Those documented percentages already sit inside the quote you see. Do not subtract them again from a receive amount that already includes them. The comparison is: same send, same pair, same networks, same rate type, then which receive amount is higher after you have also paid the wallet send fee.
Why can't you compare a fixed quote with a floating quote as if they were the same?
A fixed quote is a short-lived promise with conditions. A floating quote is a market-following outcome. Putting them in one column labelled "fee" hides that difference. The lower documented percentage on a floating order (0.5 percent plus network, versus 1 percent plus network on fixed, as of 2026-11-08) does not automatically mean you receive more, because the market can move before the rate is set.
If you need to know the receive amount before you send, a fixed-rate order is the type that states it up front, subject to the FAQ's timing and market-move conditions. If you can accept a different receive amount, a floating-rate order uses the lower documented percentage and follows the market. Choose the type first, then compare providers or routes inside that type. Swappr shows both choices in the amount step; pick one on purpose.
Which network costs sit outside the swap quote?
You pay a network fee to send the deposit from your wallet, and you may later pay another network fee to move the received coins. Neither fee is a Swappr subscription. On TRON, sending USDT requires Bandwidth or Energy, which is why people hold TRX; that is explained in the guide on why you need TRX to send USDT on TRON. On Bitcoin or Ethereum the send fee is set when you broadcast, and a low fee can leave the deposit unconfirmed for a long time. FixedFloat's FAQ warns that a low network fee can delay the required confirmations and delay the order.
The destination network matters as much as the source. The comparison of USDT on TRC20, BEP20 and ERC20 is about matching the network your receiving wallet actually uses, not about picking the cheapest-looking label. A wrong network can mean a recovery process, or a loss, instead of a saving. If an address is rejected, compare it again with the receiving wallet before you try a different destination.
How does this look in Swappr?
Swappr is a free Android app for simple multi-coin crypto swaps, built by GSPTeck, with FixedFloat as the documented provider. In the app you pick the pair, enter an amount, choose fixed or float, paste your own receiving address, and send the exact deposit from the wallet you control. Features that matter for a cost comparison are the visible pair and network labels, the fixed-or-float choice, the quoted receive amount, and the order ID you can save. Honest limits: Swappr does not give investment advice, does not hold a customer balance, and does not publish a live fee table of its own beyond what you see on an order and what FixedFloat documents. For who holds coins during an order, see whether Swappr is safe and who holds your coins.
A fair comparison against another app or website uses the seven checks above on the same pair, amount and rate type, at nearly the same moment. It does not use a screenshot from last week or a percentage copied without the network names. If you only need to move between coins you already hold in your own wallets, Swappr is built for that path. If you need a custodial trading account, order books or fiat withdrawals, that is a different product and a different set of costs.
FAQ
Does Swappr charge its own extra percentage on top of FixedFloat?
This page does not invent a second fee. The documented percentages quoted above come from FixedFloat's FAQ, checked on 2026-11-08. In Swappr you see the pair, the rate type and the receive amount on the order itself. Compare that receive amount with any other quote you take under the same conditions.
Is a floating rate always cheaper because the documented fee is 0.5 percent?
No. The documented floating fee is lower than the documented fixed fee, but the receive amount can move with the market until the rate is set. Cheaper is the higher receive amount after the wallet send fee, not the smaller printed percentage.
Should I include miner or validator fees in the comparison?
Yes, if you pay them. The send fee from your wallet is a real cost of completing the order, and a later send from the destination wallet is a real cost of using the coins. FixedFloat also describes a network fee on its side as individual to each blockchain.
Can I use this checklist on pairs Swappr does not list?
The seven checks work for any swap quote you can view. Use Swappr only for pairs and networks the app actually offers when you open it. This post does not list supported coins, because that list belongs on the live order screen, not in an article that would go stale.
Sources
- FixedFloat FAQ (fees, fixed vs float, network fee, confirmation timing) (checked 2026-11-08)
- Swappr on Google Play (checked 2026-11-08)